PVC-U drainage pipe and pipe fittings are made of polyvinyl chloride (PVC) resin as the main raw material, adding appropriate amount of additives, extruded and injection molded pipe and pipe fittings, which can be used for indoor and outdoor drainage of high-rise and multi-storey industrial and civil buildings. system. The continuous discharge of domestic sewage temperature is not more than 40 ° C, and the instantaneous discharge temperature is not more than 80 ° C.

Product classification: According to different connection forms, it can be divided into adhesive edge type and elastic sealing ring connection type. Antong brand PVC-U drainage pipe is adhesive connection type pipe. Executive standard: GB/T5836.1-2006 "hard polyvinyl chloride (PVC-U) pipe for building drainage" GB/T5836.2-2006 "hard polyvinyl chloride (PVC-U) pipe fittings for building drainage" Specification: pipe Classified by outer diameter, the specifications are 32, 40, 50, 75, 90, 110, 160, 200 eight specifications. Technical parameters: unit: mm nominal outer diameter dn average outer diameter wall ?????????? Thickness minimum maximum value minimum value 3232.032.22.02.44040.040.22.02.45050.050.22.02.47575.075.32.32.79090.090.33.03 .5110110.0110.33.23.8160160.0160.44.04.6200200.0200.54.95.6 Features: A, good anti-aging performance, long service life; B, excellent resistance to various inorganic acids, alkalis, salts, suitable for Various types of industrial sewage discharge; C, the pipeline friction coefficient is small, the water circulation is smooth, not easy to block; D, the installation uses glue connection, the installation is easy and simple, saving man-hours; E, the pipeline linear expansion coefficient is small, the deformation amount is affected by temperature. Scope of application: It can be used in indoor and outdoor drainage systems for high-rise and multi-storey industrial and civil buildings. The continuous discharge of domestic sewage temperature is not more than 40 ° C, and the instantaneous discharge temperature is not more than 80 ° C. Usage and precautions: 1. Shearing: According to the length of use, use a hacksaw to gently saw at the shearing position. The end surface of the pipe should be flat and perpendicular to the axis. Cut a pipe end at 30-45 degrees to the outside corner. The thickness of the pipe end is 1/4-1/3. 2. Gluing: The inner wall of the pipe socket and the outer wall of the pipe end are inserted, wiped clean with a dry cloth, and the insertion depth mark is drawn. 3. Adhesive brushing should be applied to the inside of the socket of the pipe fitting and the outside of the socket. The adhesive should be quickly, evenly and properly. After painting, find the positive direction, insert the pipe into the socket, and apply pressure to insert the pipe end into the depth mark. And rotate 90 degrees, the pipe socket must not be hit with a hammer. 4. One set of expansion joints for each layer of the riser is used to compensate for the thermal expansion and contraction of the plastic pipe. 5. If each layer of the riser is less than 3 meters in height, consider setting one of the pipe sets, and the horizontal pipe shall be installed with a lifting card of 0.8m per specified length.

Yinan County Xinxing Pipe Industry Co., Ltd. is located in Weinan County. The company has a registered capital of 3.9 million yuan and covers an area of 21,520 square meters, including a construction area of 14,962 square meters. It has 188 employees, including 34 professional and technical personnel, and has excellent production and R&D teams. It has fixed assets of 30 million yuan and an annual output value of 110 million yuan. It is a member of Shandong Construction Science and Technology Association.

In recent years, with the promotion and application of China's plastic building materials, the plastic pipe industry has developed by leaps and bounds. Our company has developed new water supply and heating pipes such as PP-R pipe, PP-R aluminum-plastic composite pipe and PE-RT floor heating pipe. The company now has ten polypropylene (PP-R) pipe production lines for hot and cold water, three PP-R aluminum-plastic composite pipe production lines, three PE-RT pipe production lines and eight tube injection molding machines. It can produce 25 million meters of PP-R pipe, 6 million meters of PP-R aluminum-plastic composite pipe, 10 million meters of PR-RT pipe and 500 tons of pipe fittings. In 2012, the company added five new PVC-U drainage pipe production lines, four insulated and flame-retardant electrical casing production lines and five pipe injection molding machines to produce PVC-U solid wall drainage pipes, pipe fittings, hollow spiral drainage pipes and electrical casings. At this point, "Antong" brand products have covered the construction of water supply and drainage, floor heating, electrical casing and other piping systems.