Air cooler series
Design of air cooler
Air cooling device is the use of the environment in the air cooling tube, in two different media have a temperature difference between the need for cooling or condensation, can show the advantages of low cost operation.
According to different application fields, we can choose the dry air cooler or the evaporative air cooler with the flexible choice.
Air cooling unit
Air cooler made of finned tubes, hairdryer, fan, an electric motor, a supporting structure and maintenance platform, blinds and other customers requirements of equipment.
Dry air cooling device occupies a relatively large area, but can save water resources 100%.
Evaporative air cooler
The evaporative air cooler comprises a blower system, a spray water system, a coil heat exchanger, a water tank, a supporting part, etc.. Due to the evaporation of water, it has a smaller heat exchange area, smaller power consumption and a portion of water consumption, so that a high heat transfer efficiency, and return on investment of high efficiency heat transfer equipment.
Pit air cooling type
The tube bundle is positioned in the lower side of the fan, due to the air duct to the bundle has a very good role in preventing the dust, wind, rain, snow, the lead wind type air cooler with stable heat transfer performance. At the same time, it has the characteristics of air quantity distribution, less heat cycle, less damage and low noise.
Inclined top
Tube bundle 60 of the inclined roof type air cooler. Inclined at the top of the frame, the floor space is small. It is better for the condensation of the medium, the resistance of the tube and the heat transfer coefficient of the film.
Blast type
Tube bundle is located in the exhaust side of the fan, the structure is very convenient to maintain, and the fan motor is always in a cold air environment, the motor life is long.
Series type
First air cooling, after evaporation cooling, the motor is not heated, long life. Maximize the function of the air cooling section. Water saving effect is obvious. Empty cooler and evaporative air cooler organic combination of, in the province at the same time to meet the more applications, (medium outlet as close to the ambient temperature)
Finned tube
I plant the production of finned tube mainly includes:, hydraulic pressure, the expansion piece tube, double metal tube and elliptical tube hot-dip zinc, aluminium elliptic tube. All the fins are detected by the state authority. Test data can be obtained from the technical department of our company.
