Characteristic：
The structure is simple and easy to maintain: without the friction disk, the motor directly drives the flywheel to move forward and reverse. Drive the slider up and down movement of parts, easy to wear and easy to move, produce striking force, low maintenance costs.
The consistency of the product is good: the speed of the motor can be set arbitrarily. Therefore, the striking force of the sliding block and the striking energy can be arbitrarily arranged in the allowable range, which ensures the consistency of the size of the batch forming parts.
High efficiency and energy saving: the production efficiency is higher than the traditional friction press, the system energy consumption is reduced by about 30%.
Using PLc control: a high degree of automation, button operation, program control, high reliability, little helper.
High safety performance: the design of a double brake, to ensure that the slider at any location to stop.
Design a little dynamic, single, three consecutive working attitude.
Point move: as the transfer mode, after debugging the mold, must switch the working state, can enter the official working state, prevents the accidental damage mold.
One time: the mode of operation can be achieved in a cycle of light intensity M times, in the intensity of the fight against N times, heavy efforts to combat L times after the stop work, waiting for the signal to work again. Whether the three kinds of striking force input can be selected by the panel button, the three kinds of striking force can be adjusted by adjusting the knob in a certain range.
Continuous: designed the working condition for the realization of automatic presses, can achieve continuous cycle of more than a single working state, reserved for a multi-channel signal interface and driver circuit interface, can realize weighing, feeding, forming, a brick process automatic control.
Safety design: the design of infrared safety protection device interface, to prevent the occurrence of personal accident injury.
Brake function: the design of the motor brake and mechanical brake double brake function, to ensure that in any position can brake, can achieve the upper limit, power point moving in any parking brake.
Slide hit number adjustment: can adjust the number of shots per minute by adjusting the motor starting time and return speed.
| Types | MR-315 | MR-400 | MR-500 | MR-630 | MR-800 | MR-1000 | MR-1250 | MR-1600 |
| Nominal pressure（KN） | 3150 | 4000 | 5000 | 6300 | 8000 | 10000 | 12500 | 16000 |
| Maximum pressure（KN） | 6300 | 8000 | 1000 | 12500 | 16000 | 20000 | 25000 | 32000 |
| Slide stroke（mm） | 600 | 750 | 750 | 750 | 800 | 800 | 800 | 800 |
| Travel times（mm） | 20 | 20 | 20 | 180 | 18 | 15 | 14 | 14 |
| Mold height（mm） | 780 | 920 | 960 | 1150 | 1205 | 1260 | 1345 | 1100 |
| Plate thickness（mm） | 110 | 120 | 130 | 150 | 165 | 180 | 195 | 200 |
| Working table（L） | 800 | 950 | 1000 | 1250 | 1250 | 1250 | 1350 | 1700 |
| size（mm） | 940 | 1000 | 1120 | 1120 | 1250 | 1250 | 1350 | 1225 |
| Overall size（mm） | 3600 3200 2600 | 4000 4000 3400 | 4000 4300 3500 | 4500 4900 3600 | 5000 5000 4000 | 5500 5500 4000 | 5500 5500 4000 | 6000 5500 4000 |
| Motor power（KW） | 37 | 45 | 55 | 75 | 90 | 110 | 132 | 90×2 |
