▌ half volume heat exchanger
The semi-volume heat exchanger is a new product based on the large-scale structural improvement and optimization of the same type of foreign heat exchangers of the international advanced level. Its thermal performance exceeds that of traditional volumetric heat exchangers. It is the ideal equipment for heating and heating to drain water. It is a high-quality equipment for drinking water, such as hotels, villages, and villas.
▌ Product advantages:
1. The heat exchange area is concentrated and the heat exchange efficiency is high;
2. The hot water supply outlet is separated from the heating zone, and the outlet water temperature is stable;
3. The heat exchange combination part can be disassembled for easy descaling and cleaning;
4, no need to set manhole, the equipment structure is more stable;
5. Integration of heating and water storage.
The semi-volume heat exchanger has a built-in heater. The main principle is to increase the flow rate of the heated medium inside the tube and the heated water outside the tube, and change the laminar flow heat transfer into turbulent heat transfer, fully exerting the heat exchange effect of the heat exchange tube and eliminating the The short circuit phenomenon of heating water greatly increases the heat transfer coefficient, thereby achieving the purpose of improving heat transfer efficiency and increasing heat supply.
▌ Product Features:
1. The heat exchange part is an improved rapid heat exchanger with high heat transfer coefficient and large heat exchange capacity. The heat exchange capacity of the same volume is about 5-8 times that of the conventional volumetric heat exchanger;
2. Its semi-volume type features that the water storage part stores 10-20 minutes of hot water, and the head loss of the heated water is ≤0.2 m, so it can still maintain the water supply under the condition of setting the general automatic temperature control valve. Water pressure, water temperature, safety, water saving, and comfortable water;
3. The heating part is fast, the water in the tank is all hot water, no stagnant water, cold water area, volume utilization rate reaches 100%;
4. When the water consumption rate is very small or not used, the water temperature in the tank can be maintained by the work of the circulating pump on the hot water pipe. The heat exchange part is always in the flow state of the heated water, so that the heat exchange is sufficient. Energy saving. When the steam and water are changed, the condensate water temperature is lower than 80 °C;
