CQB-G high-temperature magnetic drive centrifugal pump (referred to as high-temperature magnetic pump) usually consists of four parts: motor, magnetic coupling, water cooling device and corrosion-resistant centrifugal pump. Its main feature is the use of magnetic coupling to transmit power. When the motor drives the outer magnetic steel of the magnetic coupling to rotate, the magnetic force line passes through the gap and the isolation sleeve and acts on the inner magnetic steel so that the pump rotor rotates synchronously with the motor and torque is transmitted without mechanical contact. At the power input end of the pump, since the liquid is enclosed in a stationary spacer, there is no dynamic seal and there is no leakage. The magnetic material of the magnetic coupling adopts a high-temperature resistant rare earth permanent magnet material and can withstand high temperature medium below 280 degrees while maintaining a strong magnetic torque. A water cooling device is installed between the motor and the magnetic coupling to prevent the heat of the pumped high-temperature medium from being conducted to the motor so as to maintain the normal operation of the motor and achieve high-temperature medium without leakage. Product use CQB-G magnetic pump is suitable for petroleum, chemical, pharmaceutical, smelting, electroplating, environmental protection, food, film and television processing, water treatment, national defense and other industries. It is used to transport high temperature flammable, explosive, volatile, toxic, rare precious Ideal for liquids and all kinds of corrosive liquids. It is suitable for liquids containing hard particles and fibers that have a working pressure of less than 1.6 MPa, a temperature of not more than 280°C, a density of not more than 1840 kg/m3, and a viscosity of not more than 30 cm2/s.
