Medical sterilization packaging non-woven fabric
Product material: sms non-woven fabric
Product description:
This product is a complete use of safety polypropylene fiber, which is a disposable medical supplies final sterilization packaging material formed by a layer of bacteria resistance layer and two layers of tensile extension layer. The product meets the requirements of YY/T 0698.2-2009 and EN 868-2. It has the characteristics of resistance to bacteria, anti static, tensile, extension and so on. It is suitable for use in the sterilization of medical products and can be used for sterilization of pressure steam and epoxy. Ethane sterilization, low temperature formaldehyde sterilization and hydrogen peroxide low temperature plasma sterilization.
Scope of use:
Can be used for packaging medical equipment for pressure steam sterilization, ethylene oxide sterilization, low temperature formaldehyde sterilization or hydrogen peroxide low temperature plasma sterilization.
注意事项：Notes :
1、使用前请检查灭菌包装无纺布的完好性,如有破损,请勿使用。
1, please check the integrity of the sterile packing nonwoven fabric before use. If it is damaged, do not use it.
2、建议使用两种不同颜色的灭菌包装无纺布依次包装。
2, it is recommended to use two different colors of sterile packing nonwoven fabric in turn.
3、使用后的无纺布应在规定的地点填埋或在监控下焚烧。
3, after use, the non-woven fabric should be burying at the prescribed place or under monitoring.
4、灭菌包装无纺布仅限于一次性使用。
4, sterile packaging non spinning cloth is limited to one time use.
5、受潮、发霉或过期的产品不得使用。
5, damp, mouldy or expired. The product should not be used.
6、产品效期3年，保存方法：常温避光保存。
6, the product will be effective for 3 years. The preservation method is to keep away from sunlight at room temperature.
【执行标准】YY/T 0698.2-2009 [execution standard] YY/T0698.2-2009
