MLF Digital marketing platform

HTM-A1 polycarboxylate superplasticizer

Product number:
Place of Origin: China - Shandong - Zibo
Reference Price:
NegotiableUnit:Piece
INQUIRE NOW
Save for later
Save for later
Product Details

HTM-A1 polycarboxylate superplasticizer
(Number:8101612116)
Product Readme

【Products Overview】 
HTM-A1 polycarboxylate superplasticizer Chemical Co., Ltd. Shandong Zibo Heitmann devoted themselves to

developing a new generation of environmentally friendly high-performance concrete plus

Agent, the main component for long side-chain ether ester polymer through a variety of organic monomers

and copolymerization reaction of molecular structure control design is made of polymer,

High water reduction, slump and the loss of small, high-strength performance characteristics, widely

used in different types of concrete projects or needs, especially for

C50 self-leveling concrete above and underwater high flowing self-compacting concrete. Performance

indicators are significantly in excess of GB8076-2008, JG/T223, iron

Road Department 【2009】 152 and other technical standards prescribed performance index, can be widely

used in municipal, transportation, hydropower, nuclear power, military engineering. 
【Main Technical Performance 】 
Executive Standard: GB8076-2008

Recommended dosage: 0.3 ~ 1.2% 
【Features】 
HTM-A1 polycarboxylate superplasticizer should be widely applicable to ordinary portland cement,

portland cement, slag cement, fly ash cement, moderate heat cement

And so on and configure high-performance concrete for the mixed use of fly ash, slag, silica fume and

other active mineral admixture has a good adaptability; same products and air-entraining agent,

retardation

Agent compound to improve the performance of concrete construction.

Incorporation HTM-A1 after polycarboxylate superplasticizer, water cement ratio while maintaining the

same situation, can increase the slump of concrete and more than 20cm of fresh concrete show uniform,

low viscosity, the appearance of fine luster, for the preparation of high flowing, pumping concrete,

etc. can also be used for self-compacting high performance concrete works.

Incorporation HTM-A1 after polycarboxylate superplasticizer, while maintaining strength can be achieved

under the same 25% 30% saving of cement economic benefits. 
【Usage and Precautions】  
This product is a liquid polycarboxylate water reducer, a solid content of 20% to 50% concentration of

the product, PH value is 6-7. Recommended dosage is the amount of cementitious material

0.3% ~ 1.2%. Preparation of high strength concrete, the dosage can be appropriately increased;

Optimum dosage of this product the best label in accordance with the design and testing of concrete

Choose OK. But not with naphthalene sulfonate superplasticizer compound, when preparing with other

external

Agents used simultaneously, the need to carry out compatibility tests; 
【Packing, storage】 
Product is a liquid product is required by 200 kg, 1 ton of plastic packaging containers such as drums

or tank vehicles transport, it is best not to long iron drum packing. This product

Stable, long-term storage is not hierarchical, no precipitation, the winter ice-free

Supplier`s popular products