The PE pipes that our company produces are made of high density PE material, with features of high strength, high temperature resistance, anti-corrosion, light weight, non-toxic etc., which are widely used in water supply and other fields.
Performance Feature:
1、Reliable Connection: PE pipes are connected by melt fused connection method; the intensity of the joint is higher than that of pipe body.
2、good impact resistance to low temperature, safe under the temperature of -60℃ to 60℃.
3、Good resistance to stress cracking, small flow resistance.
4、Good chemical corrosion resistance, ageing resistance, service life can be up to 50 years.
5、Good abrasion resistance, 4 times greater than that of steel pipe.
6、Transport conveniently, multiple construction methods
Application: Applied to construction water supply and drainage, buried pipe, construction heating, gas transmission pipe, electricity and telecommunication protection pipe, pipe used in industry and agriculture etc.
HDPE Pipe for water supply
Specifications of PE100 for water supply
PN
DN
Pipe Thickness
Note: 1. PE pipe is typically 6m, 9m and 12m, with +0.4% allowable tolerance, or as required by clients.2. Pipe for water supply is blue or blank, with more than 3 blue streaks in blank pipe. 3. Adopting GB13663-200 “Buried PE Pipe for Water Supply”, be qualified for sanitation standard GB/T17219-1998.
HDPE Pipe for Gas Transmission
Specifications of PE80 for gas transmission
DN
Pressure Rank
Basic Size
Allowable Deviation
Pipe Width
Tolerance
kg/m
Note: 1. SDR is the standard size proportion of the pipe.2. PE pipe is typically 6m, 9m and 12m, with +0.4% allowable tolerance; Pipes with outer diameter below 63mm can be coiled, the length of which are 50m, 100m and 150m, or as required by clients.3. Buried Pipe for Gas Transmission is yellow or blank, with more than 3 streaks in blank pipe.4. adopting GB15558.1-2003 “Buried PE Pipe for Gas Transmission”.
