Fuel Consumption Tester Overview The WYH-1A fuel consumption tester is a road test tester developed by Shandong Zibo Shida Motor Vehicle Test Equipment Co., Ltd. independently developed with a high-performance microprocessor as the core to test the economic performance of a car. Bench test can also carry out road tests.
This instrument is a precision instrument. Please pay attention to handle it gently and avoid violent vibration during use.
During use, strong light should be avoided for a long time to illuminate the LCD screen to prevent the LCD screen from aging and affect its use.
When the power indicator is off, it indicates that the internal battery is depleted. It should be charged in time to avoid affecting the test. Usually with the charger equipped with the instrument, charge about 8 hours. Note: Do not charge for a long time, so as not to affect the battery life or damage the instrument. When the instrument is not used for a long time, it should be charged every 2 months in order to keep the battery active. l
During the test, if there is no response to a key press and there is no change in the screen display, turn off the power switch. After a while, turn on the power switch again to test. Fuel consumption tester sensor should pay attention to when using:
After using the fuel consumption sensor for a period of time, it should be cleaned regularly by opening the bottom cover and flushing it with clean gasoline. l
After the fuel consumption sensor is used, apply the oil pipe to close the inlet and outlet connections. l
During use, if the sensor is stuck, apply a gas cylinder to the inlet to inflate it. l
It is forbidden to use atmospheric pressure such as air compressor to avoid damaging the sensor piston rod.
